TRUCK CRANE

cn200018914

Member since:
1 year 45 weeks

Last activity:
7 weeks 3 days

TRUCK CRANE

Posted Mon, 07/19/2010 - 05:37

Specifications of QY16D Truck Crane
Technical Data when Traveling

Classificatory	Item		Unit	Parameter
Engine	Model			D6114ZLQ5B
Outline dimension	Overall length		mm	11990
	Overall width		mm	≤2500
	Overall height		mm	3350
	Wheel base	Axle 1, Axle 2	mm	4025
	Wheel base	Axle 2, Axle 3	mm	1350
Mass	Total mass in travel state		kg	24000
	Axle load	Axle 1	kg	6400
	Axle load	Axle 2	kg	17600
Travel performance	Travel speed	Max. travel speed	km/h	≥70
	Travel speed	Min. stable travel speed	km/h	3～4
	Turning diameter	Min. turning diameter	m	≤20
	Turning diameter	Min. turning diameter at boom tip	m	≤23
	Min. ground clearance		mm	270
	Approach angle		(°)	21
	Departure angle		(°)	10
	Braking distance (at 30km/h with full load)		m	9.5
	Max. grade-ability		%	24
	Fuel consumption for 100km		L	35

Main Technical Data for Lifting Operation

Classificatory	Item				Unit	Parameter
Lifting performance	Max. total rated lifting capacity				t	16
	Min. rated working radius				m	3
	Turning radius at turntable tail				m	≤3.12
	Max. load moment	Base boom			kN.m	686
		Fully extended boom			kN.m	388
		Fully extended boom + Jib			kN.m	254
	Outrigger span	Longitudinal			m	4.6
		Lateral			m	5.4
	Lifting height	Base boom			m	≥9.9
		Fully extended boom			m	≥30.7
		Fully extended boom + Jib			m	≥38.5
Working speed	Boom raising time				s	≤60
	Boom full extension time				s	≤95
	Max. swing speed				r/min	≥2.5
	Hoist speed (single line)		Main winch	Full load	m/min	≥54
				No load	m/min	≥100
			Aux. winch	Full load	m/min	≥54
				No load	m/min	≥100
Noise limit	Crane exterior noise				dB (A)	≤118
	At seated position				dB (A)	≤90

Specifications of QY25K5 Truck Crane
Technical Data when Traveling

Classificatory	Item		Unit	Parameter
Outline dimension	Overall length		mm	12000
	Overall width		mm	2500
	Overall height		mm	3380
Mass	Total mass in travel state		kg	31000
	Axle load	Front Axle	kg	6440
		Rear Axle	kg	24600
Travel performance	Travel speed	Max. travel speed	km/h	75
	Turning diameter	Min. turning diameter	m	22
	Min. ground clearance		mm	260
	Approach angle		(°)	16
	Departure angle		(°)	13
	Braking distance (at speed of 30km/h)		m	10
	Max. grade-ability		%	30
	Fuel consumption for 100km		L	37
Power	Engine rated output		kW/(r/min.)	206/2200
	Engine rated torque		N.m/(r/min.)	1112/1400
	Engine rated speed		rpm.	2200

Main Technical Data for Lifting Operation

Classificatory	Item			Unit	Parameter
Lifting performance	Max. total rated lifting capacity			t	25
	Min. rated working radius			m	3
	Turning radius at turntable tail			m	3.065
	Max. load moment	Base boom		kN.m	961
		Fully extended boom		kN.m	450
		Fully-extend boom+Jib		kN.m	436
	Outrigger span	Longitudinal		m	4.8
		Lateral		m	6.0
	Lifting height	Base boom		m	10.2
		Fully extended boom		m	38.6
		Fully extended boom + Jib		m	47.6
Working speed	Boom elevating time	Boom raising		S	75
	Boom telescoping time	Boom full extension		S	150
	Max. swing speed			r/min	2.5
	Outrigger 　telescoping time	Outrigger beam extending/retracting synchronously		S	35/30
		Outrigger jack extending/retracting synchronously		S	40/35
	Hoist speed 　(single line)	Main winch	Full load	m/min	75
			No load	m/min	125
		Auxiliary winch	Full load	m/min	75
			No load	m/min	125

Specifications of QY40K Truck Crane
Technical Data when Traveling

Classificatory	Item			Parameter
				XZJ5401JQZ40K	XZJ5403JQZ40K
Outline dimension	Overall length mm			13050
	Overall width mm			≤2750			≤2800
	Overall height mm			3430
	Wheel base	Axle 1, Axle 2 mm		1520
		Axle 2, Axle 3 mm		3815
		Axle 3, Axle 4 mm		1350
	Track	Front mm		2240				2240
		Rear mm		2055				2075
Mass	Total mass in travel state kg			39800				40400
	Axle load	Axle 1 kg		13900				14500
		Axle 2 kg		25900				25900
Engine	Model			WD615.46				WD615.334
	Rated Power kw/ (r/min)			266/2200				247/2200
	Rated Torque N.m/ (r/min)			1460/1400		1350/1400
	Rated Rotation Speed r/min			2200		2200
Travel performance	Travel speed		Max. travel speed km/h	≥75
			Min. stable travel speed km/h	4.3
	Turning diameter		Min. turning diameter mm	≤24000
			Min. turning diameter at boom tip mm	≤26800
	Min. ground clearance mm			≥285
	Approach angle			≥16°
	Departure angle			≥11°
	Braking distance (at 30km/h with full load) m			≤10
	Max. grade-ability			≥46%
	Fuel consumption for 100km L			≤46

Main Technical Data for Lifting Operation

Classificatory	Item			Parameter
Lifting performance	Max. total rated lifting capacity t			40
	Min. rated working radius m			3
	Turning radius at turntable tail m			≤3.482
	Max. load moment	Base boom kN·m		1400
		Fully extended boom kN·m		720
		Fully extended boom + Jib kN·m		528
	Outrigger span	Longitudinal m		5.65
		Lateral m		6.6
	Lifting height	Base boom m		≥10.9
		Fully extended boom m		≥40.4
		Fully extended boom + Jib m		≥55.1
	Boom Length	Base boom m		10.7
		Fully extended boom m		40.1
		Fully extended boom + Jib m		40.1+15
	Established angle of jib			0°, 15°, 30°
Working speed	Boom raising time s			≤88
	Boom full extension time s			≤180
	Max. swing speed r/min			≤2.0
	Outrigger extension time	Horizontal outrigger	Synchronous s	≤30
			Synchronous s	≤20
		Vertical outrigger	Synchronous s	≤35
			Synchronous s	≤30
	Hoist speed	Main winch m/min		≥110
		Aux. winch m/min		≥110
Noise limit	Crane exterior noise dB(A)			≤118
	At seated position dB(A)			≤90

Specifications of QY50K Truck Crane
Technical Data when Traveling

Classificatory	Item		Unit	Parameter
Outline dimension	Overall length		mm	13100
	Overall width		mm	≤2750
	Overall height		mm	3350
	Wheel base	Axle 1, Axle 2	mm	1520
		Axle 2, Axle 3	mm	3815
		Axle 3, Axle 4	mm	1350
Mass	Total mass in travel state		kg	38580
	Axle load	Front axle	kg	12950
	Axle load	Rear axle	kg	25630
Travel performance	Travel speed	Max. travel speed	km/h	66
	Travel speed	Min. stable travel speed	km/h	2.7
	Turning diameter	Min. turning diameter	m	24
	Turning diameter	Min. turning diameter at boom tip	m	26.8
	Min. ground clearance		mm	285
	Approach angle		(°)	16
	Departure angle		(°)	16
	Braking distance (at 30km/h with full load)		m	10
	Max. grade-ability		%	27
	Fuel consumption for 100km		L	36
Power	Model			WD615.67A
	Engine rated output		kW/(r/min.)	206/2200
	Engine rated torque		N.m/(r/min.)	1100/1400
	Engine rated speed		rpm.	2200

Main Technical Data for Lifting Operation

Classificatory	Item				Unit	Parameter
Lifting performance	Max. total rated lifting capacity				t	50
	Min. rated working radius				m	3
	Turning radius at turntable tail				m	≤3.485
	Max. load moment		Base boom		kN.m	1764
			Fully extended boom		kN.m	823
			Fully extended boom + Jib		kN.m	492.8
	Outrigger span		Longitudinal		m	5.65
			Lateral		m	6.6
	Lifting height		Base boom		m	10.75
			Fully extended boom		m	40
			Fully extended boom + Jib		m	55.8
Working speed	Boom raising time				s	88
	Boom full extension time				s	180
	Max. swing speed				r/min	2.0
	Hoist speed	Main winch		Full load	m/min	≥85
				No load	m/min	≥110
		Aux. winch		Full load	m/min	≥80
				No load	m/min	≥110
Noise limit	Crane exterior noise				dB (A)	≤118
	At seated position				dB (A)	≤90

Specifications of QY60K Truck Crane
Technical Data when Traveling

Classificatory	Item		Unit	Parameter
Outline dimension	Overall length		mm	13500
	Overall width		mm	2800
	Overall height		mm	3510
	Wheel base	Axle 1, Axle 2	mm	1470
		Axle 2, Axle 3	mm	4105
		Axle 3, Axle 4	mm	1350
	Track	Front	mm	2304
	Track	Rear	mm	2075
Mass	Total mass in travel state		Kg	41000
	Axle load	Axle1, Axle 2	Kg	15000
	Axle load	Axle 3, Axle 4	Kg	26000
Engine	Engine rated output		Kw/(r/min)	266/2200
	Engine rated torque		N.m/(r/min)	1250/1500
	Engine rated speed		r/min	2200
Travel performance	Travel speed	Max. travel speed	Km/h	75
	Travel speed	Min. stable travel speed	Km/h	3
	Turning diameter	Min. turning diameter	m	24
	Turning diameter	Min. turning diameter at boom tip	m	29.0
	Min. ground clearance		mm	290
	Approach angle		°	17.5
	Departure angle		°	12
	Braking distance (at 30km/h with full load)		m	≤10
	Max. grade-ability		%	40
	Fuel consumption for 100km		l	45

Main Technical Data for Lifting Operation

Classificatory	Item				Unit	Parameter
Lifting performance	Max. total rated lifting capacity				t	60
	Min. rated working radius				m	3
	Turning radius at turntable tail				mm	3550
	Max. load moment		Base boom		KN.m	2060
			Fully extended boom		KN.m	824
	Outrigger span		Longitudinal		m	5.81
			Lateral		m	6.7
	Lifting height		Base boom		m	11.2
			Fully extended boom		m	42
			Fully extended boom + Jib		m	58
	Boom Length		Base boom		m	11.5
			Fully extended boom		m	42
			Fully extended boom + Jib		m	57
	Jib offset angle				°	0, 15, 30
Working speed	Boom elevating time		Raise		S	60
			Decline		S	80
	Boom full telescoping time		Extend		S	150
			Retract		S	100
	Max. swing speed				r/min	2.0
	Outrigger extension time	Horizontal outrigger		Synchronous extension	S	30
				Synchronous retraction	S	20
		Vertical outrigger		Synchronous extension	S	35
				Synchronous retraction	S	30
	Hoist speed (Single line)	Main winch		Full load	m/min	75
				Null load	m/min	130
		Aux. winch		Full load	m/min	98
				Null load	m/min	108

Main Technical Specifications of QY100K Truck Crane
Technical Data when Traveling

Classificatory	Item		Unit	Parameter
Outline dimension	Overall length		mm	15230
	Overall width		mm	3000
	Overall height		mm	3860
Mass	Total mass in travel state		kg	65000
Travel performance	Travel speed	Max. travel speed	km/h	75
		Min. stable travel speed	km/h	0.5
	Turning diameter	Min. turning diameter	m	24
		Min. turning diameter at boom tip	m	26.6
	Power ratio		kW/t	7.3
	Min. ground clearance		mm	310
	Approach angle		(°)	23
	Departure angle		(°)	15
	Braking distance (at 30km/h)		m	≤10
	Max. grade-ability		%	40
Power	Engine rated output		kW/(r/min.)	324/1800
	Engine rated torque		N.m/(r/min.)	2100/1200

Main Technical Data for Lifting Operation

Classificatory	Item			Unit	Parameter
Lifting performance	Max. total rated lifting capacity			t	100
	Min. rated working radius			m	3
	Max. load moment	Base boom		kN.m	3238
		Fully extended boom		kN.m	1670
		Fully extended boom + Jib		kN.m	1127
	Outrigger span	Longitudinal		m	7.56
		Lateral		m	7.6
	Boom length	Base boom		m	12.8
		Fully extended boom		m	48
		Fully extended boom + Jib		m	48 + 18.1
	Jib offset angle			°	0, 15, 30
Working speed	Boom elevating time		Boom raising	s	60
	Boom telescoping time		Full extending / Full retracting	s	140
	Max. swing speed			r/min	2
	Hoist speed (single line at 4th layer)	Main winch		m/min	110
		Aux. winch		m/min	85

Specifications of QY130K Truck Crane
Technical Data when Traveling

Classificatory	Item		Unit	Parameter
Outline dimension	Overall length		mm	14950
	Overall width		mm	3000
	Overall height		mm	3950
	Axle base	Axle 1, Axle 2	mm	1420
		Axle 2, Axle 3	mm	2420
		Axle 3, Axle 4	mm	1875
		Axle 4, Axle 5	mm	1350
		Axle 5, Axle 6	mm	1400
	Wheel base		mm	2610/2307
Mass	Total mass in travel state		kg	62000
	Axle load	Axle 1, Axle 2	kg	8800/8800
		Axle 3, Axle 4	kg	9200/12700
		Axle 5, Axle 6	kg	12700/9800
Power	Crane 　super structure 　engine	Rated power	kw/(r/min)	162/2100
		Rated torque	N.m/(r/min)	854/1400
		Rated speed	r/min	2100
	Crane carrier 　engine	Rated power	kw/(r/min)	390/1800
		Rated torque	N.m/(r/min)	2400/1080
		Rated speed	r/min	2000
Travel performance	Travel speed	Max. travel speed	km/h	70
	Travel speed	Min. stable travel speed	km/h	2.1
	Min. turning diameter		m	24
	Min. ground clearance		mm	275
	Approach angle		(°)	23
	Departure angle		(°)	14
	Braking distance (at 30km/h)		m	≤ 10
	Max. grade-ability		%	40
	Fuel consumption for 100km		L	80

Main Technical Data for Lifting Operation

Classificatory	Item			Unit	Parameter
Lifting performance	Max. total rated lifting capacity			t	130
	Min. rated working radius			m	3
	wing radius at counterweight tail			mm	4600
	Max. load moment	Base boom		kN.m	5003
		Fully extended boom		kN.m	2752
	Outrigger span	Longitudinal		m	7.56
		Lateral		m	7.6(5.2)
	Boom height	Base boom		m	13
		Fully extended boom		m	58
		Fully extended boom + 　Jib(28m)		m	86.5
	Boom length	Base boom		m	13
		Fully extended boom		m	58
		Fully extended boom + 　Jib (20m)		m	81
	Jib offset angle			°	0, 15, 30
Working speed	Boom elevating time	Boom raising		s	60
	Boom telescoping time	Full extending		s	420
		Full retracting		s	400
	Max. swing speed			r/min	1.8
	Outrigger telescoping 　time	Outrigger beam	Synchronous extension	s	50
			Synchronous retraction	s	40
		Outrigger jack	Synchronous extension	s	50
			Synchronous retraction	s	45
	Hoist speed (single 　line at 4th layer)	Main winch (Null load)		m/min	115
		Aux. winch (Null load)		m/min	115
Noise	Crane exterior noise			dB (A)	≤118
	At seated position			dB (A)	≤90

Specification of QY20H431 Truck Crane

Item			Value	Remarks
Working performance specification	Max. rated total lifting capacity kg		20000
	Max. load moment of basic boom kN.m		850
	Max. load moment with max. main boom length kN.m		458.6
	Max. lifting height of main boom m		32.60	Deformation of boom is not taken into consideration.
	Max. lifting height of fly jib m		40.4
Working speed	Max. speed of single rope on main winch m/min		120	The 4^th layer of drum
	Derricking time of booms		60
	Telescopic time of booms		70
	Slewing speed r/min		0~1.8
Traveling specification	Max. traveling speed km/h		70
	Max. grade ability %		27
	Min. turning circle diameter m		20
	Min. ground clearance mm		250
	Limits for exhaust pollutants and smoke		Comply with related standards	GB3847-2005 GB17691-2005 (Stage III)
	Oil consumption per hundred kilometers L		40
Mass specification	Deadweight of crane in traveling condition kg		26080
	Complete vehicle kerb mass kg		25885
	Front axle load kg		6380
	Rear axle load kg		19700
Dimension specification	Overall dimensions (L×W×H) mm		12320×2500×3400
	Base on outriggers m		4.95
	Distance between outriggers m		5.6
	Main boom length m		10.2~32
	Main boom angle°		-2～80
	Fly jib length m		8
	Offset angle of fly jib°		0, 30
Chassis	Model		ZLJ5261
	Class		II
	Feature No.		ZLJ5261H3.2
	Engine	Model	WP6.240
		Rated power kW/r/min	176/2500
		Max. output torque N.m/r/min	800/1300～1500

Specification of QY40V532 Truck Crane

Item			Value	Remarks
Working performance specification	Max. rated total lifting capacity kg		40000
	Max. load moment of basic boom kN.m		1430
	Max. load moment with max. main boom length kN.m		800
	Max. lifting height of basic boom m		12.0
	Max. lifting height of main boom m		41.7	Deformation of boom is not taken into consideration.
	Max. lifting height of fly jib m		56.4
Working speed	Max. speed of single rope on main winch m/min		130	The 4^th layer of drum
	Max. speed of single rope on auxiliary winch m/min		80	The 2^nd layer of drum
	Derricking time of booms		40
	Telescopic time of booms		80
	Slewing speed r/min		0~2.2
Traveling specification	Max. traveling speed km/h		70
	Max. grade ability %		30
	Min. turning circle diameter m		24
	Min. ground clearance mm		280
	Limits for exhaust pollutants and smoke		Comply with related standards	GB3847-2005 GB17691 -2005 (Stage III)
	Oil consumption per hundred kilometers L		48
Mass specification	Deadweight of crane in traveling condition kg		36900
	Complete vehicle kerb mass kg		36870
	Front axle load kg		13700
	Rear axle load kg		24300
Dimension specification	Overall dimensions (L×W×H)mm		13060×2750×3560
	Base on outriggers m		5.60
	Distance between outriggers m		6.90(fully)
	Main boom length m		10.9~41.0
	Main boom angle°		-2～80
	Fly jib length m		9 ,15
	Offset angle of fly jib°		0 , 30
Chassis	Model		ZLJ5414
	Class		II
	Engine	Model	WP10.290	QSL 325
		Rated power kW/r/min	213/2200	242/2100
		Max. output torque N.m/r/min	1160/1200～1600	1424/1500

Technical Specification of QY90V533 Truck Crane

Item			Specification	Remarks
Working performance	Max. rated lifting capacity kg		90000
	Max. lifting torque of basic boom kN.m		3240
	Max. lifting torque of Max. length boom kN.m		1800
	Max. lifting height of basic boom m		13.4
	Max. lifting height of boom m		48.5	The specifications do not include deflection of boom and jib.
	Max. lifting height of jibm		67
Working speeds	Max. hoist rope speed (Main winch) m/min		122	Drum 4^th layer
	Max. hoist rope speed (Auxiliary winch) m/min		68	Drum 2^nd layer
	Boom derricking times		72
	Boom extending time s		146
	Max. slewing speed r/min		1.9
Traveling specifications	Max. traveling speed km/h		78
	Max. gradeability %		43
	Min. turning radius m		24
	Min. ground clearance mm		290
	Limit for exhaust pollutants and smoke		Conform to related standards.	GB3847-2005 GB17691 -2005 Conform to GB3847-2005 GB17691-2005 (Stage III)
	Oil consumption per hundred kilometers L		70
Weights	Self weight in traveling condition kg		55000
	Complete vehicle kerb mass kg		54870
	Axle load (Front) kg		19600
	Axle load (Rear) kg		35400
Dimensions	Overall dimensions(L×W×H)mm		14550×2750×3750
	Longitudinal distance between outriggers m		7.3
	Transversal distance between outriggers m		7.4
	Boom length m		12.5~48
	Boom angle °		-2～80
	Jib length m		10.8, 18.5
	Offset°		0, 30
Chassis	Model		ZLJ5550
	Type		II
	Engine	Model	WP12.430N
		Rated power kW/r/min	316/1900
		Max. torque N.m/r/min	2060/1100~1400

International Trade

TRUCK CRANE

Footer Nav